|
VP-MB945G Catalog
VP-MB945G was designed for security applications. It is best suited for DVR machine assembly. It has 4 PCI slots and 2 PCI-E connectors with built-in RS-485 and GPIO devices. These special functions are different from commercially available motherboards. VP-MB945G is your ONLY choice for its stable, simple and valuable features.
please contact
your local VPON reseller or contact vpon.sales@formosa21.com for more information.
Key features for security :
- On board VGA
- On board GPI x16, GPO x16 (optional)
- SATA x4
- PCI x4, PCI-express x2
- USB x4, RS-232 x1, RS-485 x1
Specipication:
CPU:
• Support Socket 775 • Support Intel R Pentium R Extreme Edition/ Pentium R 4 Extreme Edition/ Pentium R D/ Pentium R 4/ Celeron R D Processor • Support Hyper-Threading Technology Support 1066 MHz/ 800 MHz/ 533 MHz FSB (Front Side Bus) Frequencies
Chipset:
• Northbridge Chipset Intel R 945G • Southbridge Chipset Intel R ICH7 • I/O Controller ITE R IT8712F • AC' 97 Audio Codec Realtek R ALC655 • LAN Controller-- Realtek R RTL 8100C
Memory:
• Two DIMM sockets • Supports unbuffered & non-ECC DDRII 667/ 533/ 400 SDRAM • Supports a total memory capacity of up to 2 GB • Supports Dual Channel data bus
Slots:
• Two PCI-Express interface slots for graphics card and expansion card: • PCI-E x16 slot: Supports up to x16 mode • PCI-E x1 slot: Supports up to x1 mode • Four PCI interface slots for expansion cards
I/O facility Connectors:
• One multi-mode Parallel Port is capable to support as the following: • Standard & Bi-direction Parallel Port • Enhanced Parallel Port (EPP) • Extended Capabilities Port (ECP) • Support one serial port • Support one VGA ports • Support a set of GPIO (CN1, CN2) headers • Support one PS/2 mouse port and one PS/2 keyboard port • Supports one SPDIF header and one IrDA header compatible with external devices connected
Green Function:
• Supports Phoenix-Award? BIOS power management function • Supports system-wake-from-power-saving-mode by keyboard or mouse touching
Hardware Monitor Function:
• Monitors CPU/ Chassis Fan Speed • Monitors CPU and system temperature • Monitors system voltages
Watch Dog Timer:
• This function is used for detecting the system hangs during the POST stage due to conflicts resulting from changing the system BIOS settings. Once the problem is detected, the system will reset the configurations and reboot the system within five seconds.
|
